Pressured Solar Water Heater Hip-58
|FOB Price:||US $200 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $200/ Set|
|Production Capacity:||5000sets Per Month|
|Payment Terms:||L/C, T/T|
- Model NO.: HIP-58
- Structure: Compact Type
- Interior Material: Stainless Steel
- Composition: Bracket
- Capacity: 100L 150L 200L 240L 300L
- Transport Package: Standard Export Carton
- Origin: China
- Max. Capacity: >200L
- Pressure: Pressurized
- Collector Components: Glass Vacuum Tube
- Certification: CE
- Trademark: QIRUI/QIRUITE/OEM
- Specification: HIP-58
- HS Code: 8419191000
1, direct heating, high efficiency
2, pressurized hot water
3, 1% spare parts
4, CE, SOLAR KEYMARK EN12976
5, Factory price
Compact Pressured Solar Water Heater Feature
1)Highly efficient absorber of high performance with daily average efficiency over 50%.
2)Start quickly, heat pipe transfers the heat energy into the storage tank in one direction.
3)With stand pressure of 6 bar, can be connected directly with tap water.
4)No water inside the vacuum tubes, the system can still work even with several tubes breakage.
5)Highly efficient insulation with polyurethane foam.
6)Simple structure, easy to assemble and install.
7)Can be used all year around in the cold climate.
8)Can be used together with auxiliary electric heater.
9) Stable and reliable performance.
10) Environmental protection and energy saving.
11) The pressurized hot water will make your bath more comfortable.
The key of compact heat pipe pressured solar water hater is heat pipe, The heat pipe is hollow with the space inside evacuated, much the same as the solar tube. In this case insulation is not the goal, but rather to alter the state of the liquid inside. Inside the heat pipe is a small quantity of purified water and some special additives. At sea level water boils at 100oC (212oF), but if you climb to the top of a mountain the boiling temperature will be less that 100oC (212oF). This is due to the difference in air pressure.
Based on this principle of water boiling at a lower temperature with decreased air pressure, by evacuating the heat pipe, we can achieve the same result. The heat pipes used in AP solar collectors have a boiling point of only 30oC (86oF). So when the heat pipe is heated above 30oC (86oF) the water vaporizes. This va pour rapidly rises to the top of the heat pipe transferring heat. As the heat is lost at the condenser (top), the va pour condenses to form a liquid (water) and returns to the bottom of the heat pipe to once again repeat the process.
The top of heat pipe is pluged into the water tank, so the cold water inside the tank can get heat from heat pipe, and become hot water. Because the water tank is close, so it can endure 0.6Mpa(6 bar), when the tap go into the water tank from the bottom inlet, the hot water is out from the top outlet, just like the electric water heater.
|Technical Parameter of Heat Pipe Compact Pressured Solar Water Heater|
|DESCRIPTION||pressured solar water heater|
|MATERIAL OF OUT TANK||0.4mm galvanized steel/0.4mm sus304 stainless steel /0.4mm sus304-ba(bright)|
|MATERIAL OF INNER TANK||1.2mm sus304-2b stainless steel or sus316 stainless steeel|
|TANK INSULATING LAYER||50-60mm high-density polyurethane foamed|
|DIAMETER OUTER/INNER TANK||470/370mm|
|ELECTRICAL HEATER||1500w; 220v/110v|
|INLET AND OUTLET HOLE||Male 1/2", 3/4"|
|SOLAR COLLECTOR TUBE||3.3 borosilicate glass with AL/AL-ALN/ALN(single target) or CU/SS-ALN/ALN(three target)|
|THICKNESS OF GLASS TUBE||1.6mm|
|VACUUM TUBE TIGHTNESS||P≤0.005 pa|
|EMISSION RATIO||Ε h=0.04-0.06(80c± 5c)|
|IDLE SUNNING PROPERTY PARAMETERS||Y=220~260m². C/kw|
|AVERAGE HEAT LOSS COEFFICIENT||Ult=0.6~0.7w/(m2. c)|
|BRACKET:||1.2mm Stainless steel/1.6mm aluminum alloy/1.5mm galvanized steel|
|STRUCTURE OF TANK:||Usually holes for p/t valve, water inlet and outlet, electric heater, magnesium rod; custom-built will be warmly welcomed.|
|WELDING:||Automatic argon arc welding|
|FASTENER PIECES:||Stainless steel screw|
|SEAL MATERIAL||Stabilized high temperature silicon|
|Opition:||System controller SR609C, control electrical heating and display temperature|